Is the ECC memory compatible with normal motherboard?
When ECC memory is used on a motherboard that does not support ECC, the motherboard will theoretically turn off its ECC function and operate as non-ECC memory. However, if used on a less compatible mo... ... READ MORE
A memory rank is a set of DRAM chips connected to the same chip select. The memory controller may perform read/write operation on the chips in 1 rank. The chips in 1 rank also shares the same control ... ... READ MORE
Extreme Memory Profile (XMP) can enable overclocking feature of the compatible DDR3/DDR4 RAM to enhance the execution performance to above standard specification. To execute XMP, besides having RAM wi... ... READ MORE
ECC (Error correcting code): When an error was found in a storage device with ECC feature during data accessing procedure, the device will automatically detect and repair the error to keep the normal ... ... READ MORE
Are the lighting control software of RGB RAM and motherboard compatible? Can I use the control software from Corsair or Razer? Can I install different lighting control software at the same time?
Currently, T-FORCE RGB RAM supports the lighting control software from four motherboard vendors. If you wish to use the RGB control software from a third party, we recommend you to contact customer se... ... READ MORE
What is the difference in performance between memory timings vs CAS latency (CL)？
The higher memory timings, the better. The lower the CAS latency (CL), the better. You can also get better performance by using the overclocking feature. Normal players may choose the RAM with higher ... ... READ MORE
Serial presence detect (SPD) is a standard method to access information related to memory modules, such as time parameters, manufacturer, serial number and other useful information. A memory device ca... ... READ MORE
What are the important things I should know when expanding RAMs or using dual-/quad-channel?
With the dual/quad-channel RAM feature, the motherboard connects two/four RAMs of the same capacity and specification in parallel in order to increase transfer speed. In this case, the motherboard sho... ... READ MORE
What should I do when the message “Windows was unable to complete the format” or “Write Protection” when using the USB?
Please redo the action again on another computer. If the same message appears, then the flash drive may be damaged. Please contact Customer Service from Team Group to help with the issue. ... READ MORE
Error message appears (error code: 0X80071AC3) when saving files in USB device
When a device is incorrectly removed during data transfer, Windows OS system may detect error for loading the device and display a message with the error code 0X80071AC3.
Please right click [My ... ... READ MORE
What should I do when virus detected in my flash drive after antivirus scanning?
First, please backup your files and format your flash drive. All the data will be removed, including the virus, after formatting. If virus is detected after formatting, then virus is being written aga... ... READ MORE
Whether Team Group USB flash drive can be used as a bootable drive?
Team Group USB flash drive is a removable storage device. Currently, it cannot be used as a bootable drive. Boot from a USB device is a special application and can cause damage to the flash drive. Thu... ... READ MORE
This is caused by the abnormal termination of Q1. Why can't I input text with the phone's touch keyboard after using TEAM CROSS ？TEAM CROSS. Please refer to the following steps for reco... ... READ MORE
OTG, an abbreviation of On-The-Go, acts as a supplementary standard of USB. It allows USB equipment, such as mobile phones, to act as the primary device for direct connection with USB drive,... ... READ MORE