ELITE PLUS DDR5 DESKTOP MEMORY SILVER
FEATURE & CAUTION
FEATURE
CAUTION
- Simple design and comprehensive protection
- Frequency further enhanced for upgraded performance
- Effective power system configuration with low voltage for power reduction
- Transcend capacity limit with diverse upgrade options
- Optimized structure with exceptional access efficiency
- On-Die ECC mechanism for enhanced data transmission stability
- Compatible with DDR5 platforms of Intel and AMD systems
CAUTION
- For a complete list of compatible platforms, please refer to the "Compatibility Inquiry" section.
- Before purchasing memory products, please check the QVL (Qualified Vendor List) compatibility list provided by the motherboard manufacturer.
- Do not mix memory modules of different capacities, frequencies, brands, or models. Each memory kit is paired through compatibility testing. Mixing different kits may cause system instability or failure to boot.
- The quality of the CPU memory controller (IMC) and the version from the BIOS of motherboard may both potentially affect the operating frequency of the memory.
- The final operating frequency of the memory depends on system BIOS settings, and motherboard and CPU compatibility.
- If XMP 3.0 (Intel) or EXPO (AMD) is not enabled, the memory will run at the SPD default frequency (JEDEC standard), such as DDR5-4800 (or lower). This is a normal phenomenon and not a product defect.
- XMP 3.0 / EXPO must be manually enabled by the user. Some motherboards may not reach the stated frequency, as the final operating frequency depends on system settings.
- Overclocking (such as enabling XMP 3.0 / EXPO settings) is not part of the JEDEC standard and may affect system stability. If overclocking causes system instability, please revert to the BIOS default settings.
- The stated frequency of the memory module is the maximum achievable frequency. However, not all systems will be able to reach it.
- Ensure that your motherboard and processor support the corresponding overclocking technologies (XMP 3.0 / EXPO); otherwise, the memory may not reach the advertised overclocking frequency.
- TEAMGROUP memory modules are tested under normal voltage conditions. If there are any issues related to processor or motherboard malfunctions, please contact the respective after-sales service of the processor or motherboard manufacturer.
Introduction
Simple design and comprehensive protection
Symmetrical heat sink exclusively designed for ELITE PLUS DDR5. Through special processing, the heat sink in plain design is equipped with properties including scratch resistance, acid resistance, anti-corrosion, and non-conduction, offering comprehensive protection for the DDR5 memory module.
Frequency further enhanced for upgraded performance
The initial launch of the 6,000MHz module increased performance by over 50% from that of the DDR4 with a 3,200MHz limit. The enhanced speed enables upgraded high-performance operation quality.
Effective power system configuration with low voltage for power reduction
The standard operating voltage of DDR5 is 1.1V, compared with the 1.2V required for DDR4, it reduces the power consumption of bandwidth units and computer loading. In addition, the DDR5 module is equipped with a power management IC for enhanced power system configuration, enhanced transmission quality, and reduction of noise interference to the minimum.
Transcend capacity limit with diverse upgrade options
ELITE PLUS DDR5 comes with a complete range of sing-channel and dual-channel specifications from 8GB to 32GB. In line with JEDEC standards, a single memory can be up to 128GB, exceeding the limit of user memory capacity for smooth multitasking experiences.
Optimized structure with exceptional access efficiency
The structure of the DDR5 module, compared with that of DDR4, has increased the number of banks from 16 to 32. The minimal burst length is increased from 8 folds to 16 folds. It can process doubled data volume in the same amount of time, which is key to improving operational efficiency.
On-Die ECC mechanism for enhanced data transmission stability
DDR5 memory module supports On-die ECC error correction. It can repair DRAM units through its built-in functions to reduce the risk of data errors, offering enhanced stability to systems that adopt ELITE PLUS DDR5.
Compatible with DDR5 platforms of Intel and AMD systems
ELITE PLUS DDR5 is compatible with the DDR5 platforms of Intel and AMD systems. Users can rest assured in choosing the best option for an upgrade.
| Module Type | Capacity | Frequency | Latency | Data Transfer Bandwidth | Voltage | Compatibility | TEAM P/N | Compare |
|---|---|---|---|---|---|---|---|---|
| ELITE PLUS DDR5 DESKTOP MEMORY | 64GB(2x32GB) | 6400MHz | CL52 | 51200 MB/s | 1.1V | Intel: Z790 Refresh | TPSD564G6400HC52DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 64GB(2x32GB) | 6000MHz | CL54 | 48000 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD564G6000HC54DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 64GB(2x32GB) | 6000MHz | CL48 | 48000 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD564G6000HC48DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 64GB(2x32GB) | 5600MHz | CL46 | 44800 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD564G5600HC46DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 64GB(2x32GB) | 5200MHz | CL42 | 41600 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD564G5200HC42DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 64GB(2x32GB) | 4800MHz | CL40 | 38400 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD564G4800HC40DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(2x16GB) | 6400MHz | CL52 | 51200 MB/s | 1.1V | Intel: Z790 Refresh | TPSD532G6400HC52DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(2x16GB) | 6000MHz | CL48 | 48000 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD532G6000HC48DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(2x16GB) | 5600MHz | CL46 | 44800 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD532G5600HC46DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(2x16GB) | 5200MHz | CL42 | 41600 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD532G5200HC42DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(2x16GB) | 4800MHz | CL40 | 38400 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD532G4800HC40DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 16GB(2x8GB) | 5600MHz | CL46 | 44800 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD516G5600HC46DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 16GB(2x8GB) | 5200MHz | CL42 | 41600 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD516G5200HC42DC016 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 16GB(2x8GB) | 5200MHz | CL42 | 41600 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD516G5200HC42DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 16GB(2x8GB) | 4800MHz | CL40 | 38400 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD516G4800HC40DC016 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 16GB(2x8GB) | 4800MHz | CL40 | 38400 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD516G4800HC40DC01 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(1x32GB) | 6400MHz | CL52 | 51200 MB/s | 1.1V | Intel: Z790 Refresh | TPSD532G6400HC5201 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(1x32GB) | 6000MHz | CL54 | 48000 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD532G6000HC5401 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(1x32GB) | 6000MHz | CL48 | 48000 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD532G6000HC4801 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(1x32GB) | 5600MHz | CL46 | 44800 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD532G5600HC4601 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(1x32GB) | 5200MHz | CL42 | 41600 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD532G5200HC4201 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 32GB(1x32GB) | 4800MHz | CL40 | 38400 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD532G4800HC4001 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 16GB(1x16GB) | 6400MHz | CL52 | 51200 MB/s | 1.1V | Intel: Z790 Refresh | TPSD516G6400HC5201 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 16GB(1x16GB) | 6000MHz | CL48 | 48000 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD516G6000HC4801 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 16GB(1x16GB) | 5600MHz | CL46 | 44800 MB/s | 1.1V | Intel: 600 Series, 700 Series | TPSD516G5600HC4601 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 16GB(1x16GB) | 5200MHz | CL42 | 41600 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD516G5200HC4201 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 16GB(1x16GB) | 4800MHz | CL40 | 38400 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD516G4800HC4001 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 8GB(1x8GB) | 5600MHz | CL46 | 44800 MB/s | 1.1V | Intel: 600 series, 700 series | TPSD58G5600HC4601 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 8GB(1x8GB) | 5200MHz | CL42 | 41600 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD58G5200HC42016 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 8GB(1x8GB) | 5200MHz | CL42 | 41600 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD58G5200HC4201 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 8GB(1x8GB) | 4800MHz | CL40 | 38400 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD58G4800HC40016 | ADD |
| ELITE PLUS DDR5 DESKTOP MEMORY | 8GB(1x8GB) | 4800MHz | CL40 | 38400 MB/s | 1.1V | Intel: 600 series, 700 series AMD: 600 series | TPSD58G4800HC4001 | ADD |
More Product Specifications
Dimensions
31.25(H) x 133.4(L) x 6.6(W)mm
Heat Sink
Aluminum heat-sink
Operating Temperature
0°C ~ 85°C
Storage Temperature
-20°C ~ 65°C
Warranty
Lifetime warranty
Notes
1. Product Applicability and Compatibility
- TEAMGROUP memory modules are designed for desktop or laptop computers that support DDR5 DRAM (depending on the product model). However, final compatibility is determined by the motherboard, processor (CPU), and BIOS support.
- The final operating frequency of the memory depends on system BIOS settings, and motherboard and CPU compatibility. For example, even if you purchase a DDR5-6000 memory, if the motherboard or CPU only supports DDR5-5600, the memory will not exceed that frequency.
- Before purchasing, please confirm whether your motherboard, processor (CPU), and BIOS support the memory specifications you intend to buy.
- Some older Intel/AMD chipset may not support newer interface memory modules. Before purchasing, please refer to the motherboard and processor (CPU) specifications or consult the manufacturer for confirmation.
- If XMP 3.0 (Intel) or EXPO (AMD) is not enabled, the memory will run at the SPD default frequency (JEDEC standard), such as DDR5-4800 (or lower). This is a normal phenomenon and not a product defect.
- It is recommended to update your motherboard BIOS before installing the memory to ensure optimal compatibility and performance.
2. Memory Frequency and XMP3.0-EXPO Settings
- The final operating frequency of the memory depends on system BIOS settings, and motherboard and CPU compatibility.
- If XMP 3.0 (Intel) or EXPO (AMD) is not enabled, the memory will run at the SPD default frequency (JEDEC standard), such as DDR5-4800 (or lower). This is a normal phenomenon and not a product defect.
- XMP 3.0 / EXPO must be manually enabled by the user. Some motherboards may not reach the stated frequency, as the final operating frequency depends on system settings and hardware specifications.
- Overclocking (such as enabling XMP 3.0 / EXPO settings) is not part of the JEDEC standard and may affect system stability. If overclocking causes system instability, please revert to the BIOS default settings.
- The stated frequency of the memory module is the maximum achievable frequency. However, not all systems will be able to reach it.
- If the memory cannot achieve the advertised frequency due to motherboard, processor, or BIOS limitations, this should not be considered a product defect and does not qualify for warranty claims.
- TEAMGROUP memory modules are tested under standard voltage conditions. If you experience issues due to processor or motherboard failure, please contact the respective processor or motherboard manufacturer for after-sales support.
3. Overclocking and Voltage Settings
- Enabling XMP 3.0 / EXPO is considered overclocking. The final operating frequency and stability depend on the motherboard, CPU, and BIOS settings. Not all systems can achieve the advertised speeds. This is a normal phenomenon and not a product defect.
- Overclocking may cause system instability or crashes. If such issues occur, please revert to the BIOS default settings and manually adjust to the optimal configuration.
- Some motherboards may require BIOS updates and optimizations to ensure stable operation.
- If the memory's clock speed, voltage, or timings are set beyond the official specifications (JEDEC / XMP 3.0 / EXPO), it may result in system instability or damage. TEAMGROUP is not responsible for such issues, and warranty scope coverage may be affected.
4. Warranty and Support
- The warranty covers only material and manufacturing defects under normal use. It does not cover damage caused by overclocking, incorrect BIOS settings, voltage adjustments, environmental factors (such as high temperature, high humidity, electrostatic discharge), or incompatible hardware configurations.
- The advertised frequency of the memory module is not a guaranteed value. TEAMGROUP is not responsible if the memory cannot reach the advertised frequency due to system compatibility issues, and such cases do not qualify for warranty claims.
- If you encounter any compatibility or installation issues, please contact TEAMGROUP technical support for professional advice.
5. Important Reminders
- Before purchasing, please make sure that your motherboard, processor (CPU), and BIOS support the memory module you are buying to avoid incompatibility issues.
- Do not mix memory modules of different capacities, frequencies, brands, or models. Each memory kit is paired through compatibility testing. Mixing different kits may cause system instability or failure to boot.
- The quality of the CPU memory controller (IMC) and the version from the BIOS of motherboard may both potentially affect the operating frequency of the memory.
- If the system fails to boot, runs unstably, or does not achieve the advertised frequency, ensure that the BIOS is updated and that XMP 3.0 / EXPO is manually enabled.
- Different memory brands may have variations in internal timing, which could affect compatibility. To ensure system stability, it is not recommended to mix different brands or specifications of memory modules.
- We reserve the right to modify product specifications without prior notice.
- The recommended operating temperature range for this product is 0°C to 85°C, and the recommended storage temperature range is -20°C to 65°C.
- The actual maximum temperature tolerance varies depending on the IC grade and module design of each specific part number. For long-term operation in extreme environments, please contact our technical support team for further evaluation and recommendations. Operation outside the recommended temperature ranges may affect product lifespan and data reliability and is not covered under standard warranty conditions.
09.Aug.2022
